Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

waveform generator project

Status
Not open for further replies.
M

mtshingo

Newbie level 2
Joined
Apr 7, 2005
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
south africa,durban
Activity points
1,299
8038 waveform generator

would you help me with my project of designing a low cost,slot together test gear modules a 1Hz to 100KHz sine,square and triangular wave generator which uses a 8038 ic?would you provide me with the applications of the circuit.
 

8038 generator

Hi,
in the datasheet/application note there is a circuit which you can just rig up and it will work. I had domne this project.
brmadhukar
 

    M

    mtshingo

    Points: 2
    Helpful Answer Positive Rating
waveform generator ic

would you email me the whole project so that i can read through it mr. madhhukar?
 

generator 8038

go through this site

**broken link removed**
 

The 8038 is a quite old IC and soon you will have problems purchasing it.
I suggest the MAX038, by Maxim.
Probably also it is cheaper.

Mandi
 

waveform generator 8038

Hi !

I agree with FANT, the 8038 IC (Intersil) is obsolete and there are better function generators ICs. The MAX038 (Maxim) is far better tha 8038, but in my country it costs 4 times more than XR2206 (Exar) that has a very good ratio cost/benefit.
The differences are:

MAX038
Frequency range: 0 to 20MHz
Low sine wave distortion: 0.75%
Duty cycle: 15% to 85%
Sweep range: 350 to 1

XR2206
Frequency range: 0.01Hz to 1MHz
Low sine wave distortion: 0.5%
Duty cycle: 1% to 99%
Sweep range 2000 to 1
 

8038 obsolete what to do

Here's something you that might help you.
Again its based on the maxim MAX038 chip.

**broken link removed**

Cheers
sda
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top