Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS 3D radiation on the object with the mark number

Status
Not open for further replies.
S

shanmei

Advanced Member level 1
Joined
Jul 26, 2006
Messages
430
Helped
8
Reputation
16
Reaction score
8
Trophy points
1,298
Location
USA
Activity points
4,496
From HFSS, I insert the 3D radiation pattern on the object as shown in the 1st figure. But how can I add the numbers for the radiation as shown in the 2nd figure? I would like have both the radiation and numbers on the object on the same figure. Thanks.

1.PNG

2.png
 

It's done the same way as the second. In the second plot, you didn't select gain, but radiation resistance (?). Select gain dB (total) and plot Phi around Theta.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top