Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Stepper motor rotaion angle help

Status
Not open for further replies.
G

gdonhc

Newbie level 4
Joined
Sep 1, 2011
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,318
Hi,

I need to rotate a unipolar stepper motor 10 steps in cw direction and then 10 steps ccw direction to bring it back to the 1st position. But when I give the sequence ABCD (cw) and DCBA/ CBAD (ccw), it rotates a larger angle in CCW direction than it does in cw direction.

I am new to stepper motors so please let me know if there is anything I should know.
 

Check to make sure the timing or pause between sequence steps is adequate for the motor.
 
  • Like
Reactions: gdonhc

    G

    gdonhc

    Points: 2
    Helpful Answer Positive Rating
Hi,

In stepper motor, there are mainly two type of step, full wave step and half wave step. Try with half wave step which has one by half step angle in compare to full wave step.

Regards,
 
  • Like
Reactions: gdonhc

    G

    gdonhc

    Points: 2
    Helpful Answer Positive Rating
Thank you sir. It worked.:smile:

Points+
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top