Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Hi,
No need for encoder IC.
See example:
Simple Wireless Temperature Monitor Also Has Data-Logging Capabilities
https://www.maximintegrated.com/app-notes/index.mvp/id/5150
MAX6577 is a local temperature sensor that detects the ambient temperature at the device. The output of the MAX6577 is...
Hi Elaine,
I think that You should check again all suggested measures, somewhere mistake is hidden.
for next step try to reinstall OS, and first install motherboard drivers, starting with sound drivers, after that check sound output.
If this does not show some results, maybe its time to...
Hi,
Manufacturer recommendation for charging battery are in battery datasheet. Usually for 7Ah charging current should be something between 0,7-1,1A. Voltage for float charge up to 13,8V and for cycle charge up to 14,4V at 25C.
If you decide to charge your battery faster probably battery will...
Also you should know that usage, possession and trading RF jammers is prohibited in almost any country.
Think twice before you start bulk production.
Best regards,
Peter
Looks like they start to collect money on that site, but you can find relevant informations here: http://www.projecttitles4free.com/2012/01/lcd-based-voting-machine-using-8051.html
Best regards,
Peter
Read these documents:
A COMPARISON BETWEEN OOK/ASK AND FSK MODULATION TECHNIQUES FOR RADIO LINKS
**broken link removed**
Optical Modulation Methods
**broken link removed**
Best regards,
Peter
Re: PIC18F1320 stops blinking LED and restarts after 2-3 minutes
Try standard power source with earlier suggested regulators. Avoid to supply external boards from PicKit2 power except for programming purposes.
Best regards,
Peter
Re: PIC18F1320 stops blinking LED and restarts after 2-3 minutes
Probably power source is bad or cheap SMPS adapter. Try with standard 7805 regulator or any other linear/linear LDO for 5V with appropriate usage of capacitors, use 100uF before regulator, 10uF and 100nF after regulator.
Best is...
Re: PIC18F1320 stops blinking LED and restarts after 2-3 minutes
Post whole code.
Remove 47uF from uC pins, leave only 100nF between Vdd and Gnd pins close as possible.
Ensure higher voltage then 4,6V for uC, if possible 4,97-5V. PIC18F1320 dont have problem for lower voltages, but keep...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.