Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
pulsonix price
Hello don' want to start x is better than Y debate.
I am considering purchasing Pulsonix to design multilayer(8+) dense PCB.
could any one that has use pulsonix for similar boards,
comment about how feasible this is as well as
any major obstacles to using Pulsonix for such...
Thanks for the answers to my questions.
I have come back to this problem after taking a break over the holiday's :)
The DC-DC buck converter operates at 200khz
Input voltage is 40V output Voltage is 5V supplly max 10A.
As I stated in the original question I need a total 200uF min capacitace...
I am designing a high current DC-DC convert and from the equations on the data sheet.
I have calculated input capacitor of about 200uF
and the RMS current that will flow through the input capacitors will be 5A.
without going into too much information
if I choose to use 15uF ceramic that has...
I have a control circuit design and I want to have a bus btween a pic18lf2321 3.3v powered and a xilinx xc9572 xl 3.3v device.
The Xilinx device will interface directly with 3.3v cmos devices (from data sheet)
but am not sure about the pic the io are Digital level output and have ttl input...
I assume you are talking about Intel PC assembly programing.
This is a very good tutaorial used it when I first needed to program in assembly.
http://www.drpaulcarter.com/pcasm/index.php
Cages.
Re: 8086 Assembly IDE
You could try a program editor
These are not full IDE's but you can make assign different buttons to a set of instructions Like compile or Link
some of them support sytack highlighting in various asm languages.
The Link bellow has a list of different editors...
Re: c++ builder problem
**broken link removed**
the link above under portability there are instructions on configurations for the progect options so the executable will contain all the nesscary libaries(No need to copy DLL).
Re: BorlandC++ builder 5
thanks adick and jinhaozi
both links realy helped.
I have now got a quit a few sites bookmarked
with material i think i will find very useful
BorlandC++ builder 5
Does any one Know of any books that can help
me to get up to speed with Borlands IDE.
So I can use it more efficently.
I just installed it and i seem to be spending a lot of time reading the help files.
Is it worth doing a masters in the UK
I graduated four years abo with a BEng
and am working as a test Eng.
Have been tring to get a digital design job but have not been able
Will it be worth taking a year out and doing an Msc.
Not realy sure how this will improve my carea prospects
Re: Newbie Question
Try the 555 timer to generate the clock pulse.
they should be cheap and easy to find.
here is alink to a tutorial about the timmer but you dont need to read it all,
since all you need is a simple clock pulse .**broken link removed**
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
