Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
there is a problem in our circuit please help to resolve it. We have implement a 64 MHz crystal Oscillator and then the OP-Amp circuit after it. Even the Op amp circuit is isolated but the 64 MHz frequency is still reaching to the OP amp thriugh ground.
If we are measuring frequency by placing...
Space qualified
There is a task assigned to me. Can any one help me ?
The task is
"Study the electronic components mounting reqmt. and specify, soldering material, substrate material of PCBs, mounting screws, jumper wires and tools" Keep in mind that the above task is for the satellite...
adf4007
We are using ADF 4007 PLL Synthesizer IC for our PLL. We are not sure about the response of Charge pump of this IC.
Any one know the relation of duty cycle to the gfrequency difference that what % of duty cycle is obtained at what frequency difference?
Re: varactor in VCO
My design is of 2 GHz.Varctor should be in series or parrellel?Between two trnsmission line or between transmission line and ground.
varactor in VCO
How can we place our Varactor diode in generator network if we are designing using transmission line and parrellel stubs(not using discrete components).
varactor in ads
please help me infinding varactor diode in ADS. I have found only of Alpha Industries. Is there varactor of any other manufacturer. I want to use in VCO.
s band vco
I want to design s band vco. If the source and terminating network of local oscillator is design using transmission line and stubs without using discrete components ,Can it be change to vco by inserting varacter diode?
Can VCO can only be design using discrete component?
Please...
x band amplifier
I want todesign x band amplifier having gain 12 dB but not finding out the appropriate transistor.Is there any Agilent pHEMT which can be used in order to design the amplifier of required gain and frequency. We have tried many transistor but S21 parameter do not increase above...
I want to design pll based frequency synthesizer for a frequency 2 GHz.Pleaese guide me how to design.
I have develop fixed oscillator using BJT. How I can convert it into VCO.
Re: QPSK modulator
What do you think? What maximum data rate is easily achieveable in QPSK modulation. Our target is of 500 Mbps but we can compensate. What do you think?Is 300 Mbps could easily be acheived?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.