Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
did you thought about the PPC405 embedded in the Virtex II Pro
FPGA from Xilinx? The EDK (embedded development kit) supports
with tools and eclipse is the IDE for software development.
It is quite complex but has lots of features.
Hi,
which synthesis tool do you need. If you use XST (Xilinx)
or Leonardo / Precision (Mentor) or Synplify (Synplicity) they
all have also graphical user interfaces ... besides the normaly
use tcl scripts if you want to run them in batch mode ... you can
create thos tcl scripts over the gui.
Andi
Re: Xilinx Simplifies Embedded Processing Design With New 6.
Hi,
does anyone works with EDK 6.2 and ISE 6.2 ... any comments on what you are working on and how big your devices and designs are ... i am working with an XC2VP40 with AMD Flash, 10/100 ETH, DDR, UART ... the main purpose will be...
Re: how wo compile xilinx libray(ise6.1) using MODELSIM!?th
hi,
type compxlib -h ... then you get help info on how to use it
compxlib -s mti_se -f virtex:u -l verilog -o c:\tmp
this is for Modelsim SE for the Virtex Chips ... u stands for unisim
language verilog and output dir c:\temp
hope...
pll 555
Hi,
i am working on an mpc 555 system. It was in use outside
our laboratory and came back out of order. When i opened
the box the Pll of the mpc555 did not work anymore. No i am
trying to find the reason for that problem. Maybe someone in
this forum has an euqual problem. Or has some...
Re: Flash Memory
Hi
i work with the samsungs NANDs. What bugs
excist? Did you hear anything about MRAMs.
As they seem to be a good solution for not using
NAND-Flashes.
Re: Can Synplicity Identify 1.2 support Altera Cyclone Devi
hi,
did you compare identify with chipscope?
As far as i know both programs are quite
similar? Do you know the main differences?
forum?
Hi,
does anyone knows a good forum about NIOS ..
to share programs problems and stuff like that?
Has anybody made any experiences with MicroBlaze
(Xilinx) ... any compares between Nios and MB???
Which one is best or is more flexible ... how about
space (LUTs odr LC)?
Thx
other solution maybe
Hi,
Thankx a lot for the answer :o
I been thinking about another solution:
Using a VirtexII Pro (Xilinx) with integrated
PowerPC, an Ethernet MAC (IP core from Xilinx)
connected to the OPB - Bus of the PPC.
We have C-Code for a PPC for a TCP/IP
Stack. The PPC can be run...
Does anyone knows if there is C-Code for the realisation of a TCP/IP
Stack on a ADSP (Analog Devices DSP)? I need urgent helpt for that.
I use ADSP and want to integrate it in the DSP C-Code project and not
use another yC for that. Thankx
Forge
Hi,
does anyone have any docu about forge ... which java expression
need to b used to generate special HW segments ... the docu
with forge from X@l@nx is not so much ... Thankx
heat
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.