Jigar 4 Electronics
Full Member level 5
- Joined
- Apr 28, 2011
- Messages
- 312
- Helped
- 40
- Reputation
- 82
- Reaction score
- 38
- Trophy points
- 1,318
- Location
- Hamilton, ON, Canada
- Activity points
- 3,368
Hello All,
I am using XBee PRO s2.
I want to use inbuilt ADC of XBee.
I've gone through manual and have got how to do it.
But I have a confusion regarding the timing of the process.
Suppose I am taking data of ADC0 from Tx pin of my XBee PRO2 at 115200 baudrate (ADC will be configured for 1ms sample rate) and at the same time if XBee Receive a signal from the other end device then what will be the response of it.
I need to know step by step execution of this scenario. I am unable to find it in manual.
I am going to use 3 ADC channels of XBee and the other end device will might be send the data at the same time (I can't restrict this signal and also cannot precised it with respect to time to synchronize it with ADC timing)
So please help me and make me aware with this scenario.
Thanks for your time.
I am using XBee PRO s2.
I want to use inbuilt ADC of XBee.
I've gone through manual and have got how to do it.
But I have a confusion regarding the timing of the process.
Suppose I am taking data of ADC0 from Tx pin of my XBee PRO2 at 115200 baudrate (ADC will be configured for 1ms sample rate) and at the same time if XBee Receive a signal from the other end device then what will be the response of it.
I need to know step by step execution of this scenario. I am unable to find it in manual.
I am going to use 3 ADC channels of XBee and the other end device will might be send the data at the same time (I can't restrict this signal and also cannot precised it with respect to time to synchronize it with ADC timing)
So please help me and make me aware with this scenario.
Thanks for your time.