Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Zigbee drf1605H problem

Status
Not open for further replies.
G

Gyurex

Newbie level 4
Newbie level 4
Joined
Aug 8, 2013
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
50
Hello!

Recently I bought two zigbee drf1605H module, and two drf2618A uart to usb module. Downloaded the DTK zigbee configurator, and TI sensor monitor. My problem is that, when I try to configure one of these module to router, can't change the Pan id, it's alaways shows FFFE in pan id field. If i configure the second module to Coordinator, and set the FFFE pan id, the TI sensor monitor shows the coordinator, but no connected router.
What could be the problem?
Thanks in advance!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top