Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Zeninth laptop not powering on

Status
Not open for further replies.

Raajwm

Newbie level 5
Newbie level 5
Joined
Oct 20, 2010
Messages
8
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,283
Activity points
1,325
I have a Zeninth z259e12 Laptop. One day It stop working and power goes off Automaticly.After that I power on my Laptop but it not powering on.I check its power adapter with multimeter but it shows correct voltage 20.8v.I open my laptop covers and check it Dc jack but it was correct. when I plug my adapter again in laptop and check the voltage on connector it shows 0.4 volts. Wat is the problem anybody Know.Pl help
 

Something might have burnt or shorted.
 

When the power adaptor is ok and reads 20.XX volts, and when connected to the laptop, ot drops to 0.4V, naturally its means the Adaptor shuts down due to an internal short or heavy loading. The laptop's power section may have a dead short.
Cheers
 
ya it short but i cant find the burnt components
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top