sutekidane
Newbie level 1
- Joined
- Nov 9, 2009
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,288
Hi All,
I am working on a project with EMPro to simulate a Yagi-Uda antenna in the GSM-850 band (824-894 MHz). I have the driven element halfwave-dipole extruded (two hollow cylinder pieces with a gap in between for the feeding signal), but I am not sure what function to use to feed the signal to the driver elements. I watched through the tutorial videos on Agilent's website, but I still don't understand how it works. Please advise.
Thanks
I am working on a project with EMPro to simulate a Yagi-Uda antenna in the GSM-850 band (824-894 MHz). I have the driven element halfwave-dipole extruded (two hollow cylinder pieces with a gap in between for the feeding signal), but I am not sure what function to use to feed the signal to the driver elements. I watched through the tutorial videos on Agilent's website, but I still don't understand how it works. Please advise.
Thanks
