Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Y factor for noise figure measurement

Status
Not open for further replies.

Keefe

Newbie level 5
Joined
Sep 7, 2022
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
69
Mixed signal and RF test
I need assistance in solving part b for the problem statement shown below. Part a is solved and shown below using the equations provided by the professor's notes. I am not certain how to approach part b of the problem statement. Thank you in advance.
 

Attachments

  • zz.PNG
    zz.PNG
    33.1 KB · Views: 102
  • zz1.PNG
    zz1.PNG
    338.9 KB · Views: 109

NF = [ENR/(Y-1)] where NF, ENR and Y are linear values
NF(dB) = 10*log{[(500/290)-1]/[(1.89/1.6)-1]} = 6.01dB

 


Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top