"****************************************************"
"Creating system netlist for hardware specification.."
"****************************************************"
platgen -p xc3s500efg320-4 -lang vhdl -intstyle default -lp D:/Xilinx/13.4/ISE_DS/Board Support Files (EMAN) -lp D:/Xilinx/13.4/ISE_DS/EDK/board/Xilinx/boards -msg __xps/ise/xmsgprops.lst system.mhs
Release 13.4 - platgen Xilinx EDK 13.4 Build EDK_O.87xd
(nt64)
Copyright (c) 1995-2011 Xilinx, Inc. All rights reserved.
Usage: platgen [-v] [-lang verilog|vhdl] {-lp <library_path>} [-log
<logfile[.log]>] [-od <output_dir>] [-p <partname>] [-st ||||xst|none] [-ti
<instname>] [-tm <top_module>] [-toplevel yes|no] [-parallel yes|no]
<infile[.mhs]>
Display Options:
-h
Help -- just display this message and quit application.
-help
Help -- just display this message and quit application.
-v
Version - Display version and quit application.
Options:
-f <filename>
Read command line arguments and options from file.
-lang verilog|vhdl
HDL language output.
Default: vhdl
-log <logfile[.log]>
Specify log file.
Default: platgen.log
-lp <library_path>
Add <library_path> to the list of IP search directories.
-od <output_dir>
Output directory path.
Default: .
-p <partname>
Use specified part type to implement the design.
-st xst|none
Generate synthesis project files.
Default: xst
Deprecated.
-ti <instname>
Top-level instance name.
-tm <top_module>
Name top-level module as desired.
-toplevel yes|no
Input design represents a whole design or a level of hierarchy.
Default: yes
-parallel yes|no
Invokes parallel synthesis feature.
Default : no
Valid architectures are:
ERROR:Portability:90 - Command line error: Unexpected argument[10] "Files"
found.
aartix7
artix7
artix7l
aspartan3
aspartan3a
aspartan3adsp
aspartan3e
aspartan6
kintex7
kintex7l
qrvirtex4
qspartan6
qspartan6l
qvirtex4
qvirtex5
qvirtex6
qvirtex6l
spartan3
spartan3a
spartan3adsp
spartan3e
spartan6
spartan6l
virtex4
virtex5
virtex6
virtex6l
virtex7
virtex7l
zynq
"Running synthesis..."
cd synthesis & synthesis.cmd
The system cannot find the path specified.
'synthesis.cmd' is not recognized as an internal or external command,
operable program or batch file.
make: *** [implementation/system.ngc] Error 1
Done!