Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
It better to use Quad-Core Intel Xeon Processor 5400 Series
E5405....E5472, X5450......X5482
and now you can use the new Intel Core 2 Extreme Processor QX9775
Architecture 45 nanometer technology
L2 Cache 12 MB
L3 Cache N/A
Clock Speed 3.20 GHz
Front Side Bus Speed 1600 MHz
Package FC-LGA8
Chipset Intel E5400 Chipset
Boards DX5400
Slot/Socket Type LGA771-compatible only with the Intel Desktop Board DX5400 supporting a dual-socket configuration
Pin Count 771
Hp new workstation works with 667MHz **broken link removed**
or you can use desktop based on this ASUS motherboard up to ddr3 1333 and over clocking 1800
**broken link removed**
but you have to wait until Intel will come up with 45nm dual or quad for desktop.
there is another one
**broken link removed**
can use DDR3 1600 and over clocking 2000MHz
all of this depend on the chipset the first X38 and for the second X48
thanks for the information you helped a lot.
Maybe you know the relation between memory to mesh cells at CST ?
how much memory neended for amount of meshcells?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.