write_spice_deck in primetime: extracted netlist format

hi all,

I am using the command write_spice_deck of primetime because I want to simulate a path of my design in spice:

write_spice_deck -output <spice_file> -sub_circuit_file <extracted_netlist> $timing_path

however, primetime complaints for the format of my extracted netlist:

Warning: SPICE pin 'BULK!'/'VSS'/'VDD' for cell 'xxx' is not in the library. (DES-039)

My extracted netlist has many subckts that look like this:

--------------------------
.subckt NAME C VSS VDD B A Y bulk!
*
* bulk! bulk!
* Y Y
* A A
* B B
* VDD VDD
* VSS VSS
* C C
(nodes, parasitic capacitances, etc....)
--------------------------

I assume that if I add the PININFO for these pins ('BULK!'/'VSS'/'VDD') the problem will get resolved, so I add this line right below the .subckt line:

*.PININFO C:I VSS:B VDD:B B:I A:I Y:O

..and now I get another warning:

Warning: No SPICE pin order info for cell type 'xxx'. (DES-037)

anyone is familiar with this warning and can tell me what I did wrong?

thanks a bunch!

I got it solved. The issue was that VSS, VDD, bulk! should be declared as global and be removed from .subckt

ie:
*.GLOBAL bulk!
*.PIN bulk!

Dear Kaisopos
Could i ask that what is the sequences should i follow that i could finaly use write_spice_deck option?

Thanks in advance.
Oveis