Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Winpic800 error verifying address

Status
Not open for further replies.
I

ishmaelfarai

Newbie level 1
Newbie level 1
Joined
Feb 19, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,289
hi guys,i am new to programming but i'm trying to buidl myself quickly.i recently made my own jdm programmer using a schematic i saw on the net. I then used mplab successfuly to build and complile in order to produce the hex file i need to burn on my pic.I then downloaded winpic800 to burn my pic,everything works fine hardware test is ok,i can read data and code and even the settings successfully and i programmed my PIC16F877A successfully but when i try and verify i get the following error:

Error-> Verifying address 0x002003
Verified: 0x0001 Read: 0x0000

Please help i dont understand what im doing wrong,my first program was a simple c code to blink an led in ports A of the pic
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top