wide band microstrip lambda/4 design

Status
Not open for further replies.
Y

young.microwave.eng

Full Member level 3
Joined
Oct 22, 2008
Messages
150
Helped
11
Reputation
22
Reaction score
11
Trophy points
1,298
Activity points
2,310
dear roommates:
I'm going to design some microstrip λ/4 line to make an RF chock for an
amplifier design working in frequency band 900-2400 mHz.I've designed ones for some shorter B.W
but for this frequency range I think it looks wide band to some extend.do you have any Idea to help me?
thanks in advance
 

u can use dipole bowtie antenna which each pole printed on one side of substrate
 

Indeed, lambda/4 transmission line segments will be difficult over such a bandwidth :lol:

Depending on your current for the amplifier, I would use a discrete inductor or resistor for DC supply.
 

thanks for you replies
I will test your Idea. of course I could not reach the desired result using only micro strip lines
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…