[SOLVED] why pic16f88 wont work with 3.3v ?

Status
Not open for further replies.
M

mot1639

Member level 1
Joined
Jul 10, 2011
Messages
32
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,513
HI all,

I have module that work wit 3.3v and the communication protocol is SPI , i need to connect pic16f88 with it without voltage translator ..

In DS the tell that pic16f88 can work between 2.0v to 5v ... i make simple project with LED .. pic16f88 work fine with development kit which work with 5v , but when i connect it with 3.3v in bread board it wont work ????
where is issue ??

i use Internal 8 Mhz (HS) oscillator..

please any device , i stack her now ..
 

Check page 167 of the datasheet. Here is part of it:



The standard 16F88, as you can see, works from a minimum of 4.0V. The LF version - 16LF88 - can work from a minimum of 2.0V.

Hope this helps.
Tahmid.
 

Tahmid said:
Check page 167 of the datasheet. Here is part of it:



The standard 16F88, as you can see, works from a minimum of 4.0V. The LF version - 16LF88 - can work from a minimum of 2.0V.

Hope this helps.
Tahmid.
Click to expand...

I got it Mr Tahmid.....thanks for you replay ,
regards
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…