Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Why non sinusoidal signals are not used as carrier in modulation?

Status
Not open for further replies.
non sine wave carrier would require greater bandwidth and sine wave carrier is used because it produces the least amount of harmonics.
 

Simply because any non sinusoidal signal is broadened in frequency domain and attain larger bandwidth than needed. In addition such carriers would create high level harmincs that interfere with other frequencies.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top