Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Why ferrite bead spec doen't include Q factor parameter?

Status
Not open for further replies.

bittware

Full Member level 4
Joined
Apr 3, 2004
Messages
208
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Activity points
1,986
Hello experts,
Why ferrite bead spec doen't include Q factor parameter like the inductor? And for ferrite bead, if the "insertion loss" is higher within the frequency range you want to filter out, the result comes out better?

Thanks in advance!

Best regards,
bittware
 

flatulent

Advanced Member level 5
Joined
Jul 19, 2002
Messages
4,629
Helped
489
Reputation
980
Reaction score
150
Trophy points
1,343
Location
Middle Earth
Activity points
46,689
Beads are intended for attenuation and so are rated for that factor. Toroids are intended for transformers and tuned circuits where Q represents the loss.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top