Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Why do we need a ground in AC high voltage circuits?

Status
Not open for further replies.

donrigor

Junior Member level 2
Junior Member level 2
Joined
Feb 26, 2009
Messages
21
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,431
Ground

Why do we need a ground in AC high voltage circuits?
 

Ground

Coz in case there is a leakage from the internal cicruit or any coils (In case of a motor) the leaked potentional may be safely grounded so that a person coming in contact with the same is not affected. Cheers
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top