[SOLVED] Why are all reference sensitivity requirement of all bands different in WCDMA (UMTS)

Status
Not open for further replies.
C

criterion456

Member level 2
Joined
Sep 13, 2015
Messages
50
Helped
6
Reputation
12
Reaction score
6
Trophy points
1,298
Activity points
2,022




As shown above, the reference sensitivity requirement:

B1: -106.7
B2: -104.7
B3: -103.7
B4: -106.7
B5: -104.7


They are different.



However, from the sensitivity formula,

These parameters, such as bandwidth, SNRmin, are all the same in these bands.

In theory, the reference sensitivity requirement should be identical.


What makes them different?



Thanks a lot~!!
 

The basic noise power density (kTB) of a WCDMA receiver is -108 dBm/3.84 MHz, at 290K (17°C).

The 3GPP spec set various reference sensitivities in different bands function of potential interferers (in-band and out-of-band) which could appear in those bands.
 


Thanks for your reply.:-o
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…