evil1949
Newbie
- Joined
- Jul 20, 2010
- Messages
- 4
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- netherlands
- Activity points
- 1,315
Dear all,
I have two questions about calibre extraction:
1. I am using calibre pex to do extraction; and I found all of my sca/scb/scc parameter =0 or sca=sca, scb=scb,scc=scc.... It shall be a real number normally. It looks WPE is not extraced. Is there any switch in calibre PEX which I shall switched on?
2 For the output I am choosing "specified nets". So I selected a certain nets and do CC+C extraction. But at the end only a apart of nets of the selected ones are extracted. I will attach the netlist here.
thanks a lot
kr
I have two questions about calibre extraction:
1. I am using calibre pex to do extraction; and I found all of my sca/scb/scc parameter =0 or sca=sca, scb=scb,scc=scc.... It shall be a real number normally. It looks WPE is not extraced. Is there any switch in calibre PEX which I shall switched on?
2 For the output I am choosing "specified nets". So I selected a certain nets and do CC+C extraction. But at the end only a apart of nets of the selected ones are extracted. I will attach the netlist here.
thanks a lot
kr