Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Which TCP/IP stack is better, uiP or openTCP?

Status
Not open for further replies.
C

cdcll

Full Member level 3
Joined
Feb 15, 2002
Messages
163
Helped
8
Reputation
16
Reaction score
1
Trophy points
1,298
Activity points
1,199
Does anyone here have experience with above mentioned TCP/IP stacks? witch one is better for microcontroller such as MCS51?
 

uip vs lwip

uIP is good for every small MCU. It requires as little RAM as
is needed for single TCP/IP packet. RAM usage is really very low.

http://dunkels.com/adam/uip/
 

lwip vs uip

I need UDP, but it seems that uip does not support UDP, or maybe I am wrong?
 

compare uip lwip

I ported OpenTcp on 8052. I can tell, that it successfully works on controllers of 8052 family. The size of code memory for different variants:
40 kb - with serial link, protocols SLIP, IP, ICMP, UDP, TCP
11 kb - with ethernet link (CS8900A), protocols: ARP, IP, ICMP (UDP and TCP will be later)

Thus, there are difficulties with debugging using the monitor M*N51, when RAM is 32kb.

Alexey
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top