Eric.Lee
Junior Member level 1
pdv_170
1. there is a pdv_170 warning :Cell 'sd1800a_fg676' : Pins IO_LO1P_2/M1,IO_LO1N_2/M0,IO_LO2P_2/M2,IO_LO2N_2/CSO_B,IO_L25N_1,IO_L26N_1,IO_L27N_1,IO_L29N_1,IO_L44N_1,IO_L25P_1,IO_L26P_1,IO_L27P_1,IO_L29P_1,IO_L44P_1,IO_L31N_1_TRDY1/RHCLK3,IO_L49P_0,IO_L50P_0,IO_L49N_0,IO_L50N_0 are not present in any of the packages or symbols. How to dismiss it, and Does it get any affection to design?
2.I placed a global pin GND, it only display one pin only in symbol, how could i make all pins shown?
Thanks a lot.
Regards, Eric
1. there is a pdv_170 warning :Cell 'sd1800a_fg676' : Pins IO_LO1P_2/M1,IO_LO1N_2/M0,IO_LO2P_2/M2,IO_LO2N_2/CSO_B,IO_L25N_1,IO_L26N_1,IO_L27N_1,IO_L29N_1,IO_L44N_1,IO_L25P_1,IO_L26P_1,IO_L27P_1,IO_L29P_1,IO_L44P_1,IO_L31N_1_TRDY1/RHCLK3,IO_L49P_0,IO_L50P_0,IO_L49N_0,IO_L50N_0 are not present in any of the packages or symbols. How to dismiss it, and Does it get any affection to design?
2.I placed a global pin GND, it only display one pin only in symbol, how could i make all pins shown?
Thanks a lot.
Regards, Eric