Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

what's the different between CPW and Microstrip line?

Status
Not open for further replies.

bitele

Member level 1
Joined
Aug 17, 2008
Messages
34
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,468
cpw strip line

and why the bandwidth of coplanar waveguide (CPW) is greater than microstrip line?
 

coplanar waveguide line

vfone said:
http://www.jlab.org/accel/eecad/pdf/050rfdesign.pdf
If I make a stripline track with ground plane above and below it and then pour ground at its right and left side, it becomes similar to coplanar waveguide with ground, except that it is not microstrip but stripline. How do we call such track, and how is the performance on EMI and noise reception? How do we calculate its impedance?
 

cpw stripline

Hi

There are few reference books that are dealing with your problem:

Terry Edwards –
Foundations of Interconnect and Microstrip Design, 3rd Edition, John Wiley & Sons, 2000
K.C. Gupta, Ramesh Garg, Inder Bahl, Prakash Bhartia –
Microstrip Lines and Slotlines, Second Edition, Artech House, 1996
Rainee N. Simons –
Coplanar Waveguide Circuits Components and Systems, John Wiley & Sons, 2001

flyhigh
 

cpw mircostrip

flyhigh said:
Hi

There are few reference books that are dealing with your problem:

Terry Edwards –
Foundations of Interconnect and Microstrip Design, 3rd Edition, John Wiley & Sons, 2000
K.C. Gupta, Ramesh Garg, Inder Bahl, Prakash Bhartia –
Microstrip Lines and Slotlines, Second Edition, Artech House, 1996
Rainee N. Simons –
Coplanar Waveguide Circuits Components and Systems, John Wiley & Sons, 2001

flyhigh
Thank you for the information. From the book Coplanar waveguide circuits, components, and systems section 1.2, there mentioned several types of CPW, but all of them are microstrip (top or bottom layer). Is it uncommon to have stripline for transmission line?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top