Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

what value does the solution frequency I need to setup?

Status
Not open for further replies.
D

davison7

Junior Member level 2
Joined
Aug 30, 2008
Messages
22
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,281
Activity points
1,456
Hi,everybody

I design a dual-band antenna with the HFSS software. The antenna is designed for the GSM system and has the operation frequency of 900 MHz and 1.8 GHz, respectively. But the HFSS simulator has a "solution frequency" option for the computing functions. So what value does the solution frequency I need to setup for getting the accurate simulation?
 

Hi,

Try to add another solution setup, and so you can set two solution frequency as 900MHz and 1.8GHz.
The extra effort you have to make is two frequency sweep.

Best Regards.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top