Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What kind of connectors are these? Where do i get them?

Status
Not open for further replies.

joshskoollive

Newbie level 4
Joined
Jul 23, 2015
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
28
IMG_0319.JPG

What kind of connector is this? Name? Where can I find these?

They are for a power supply circuit board that powers a TV.
 

Mattylad

Advanced Member level 3
Joined
Sep 7, 2009
Messages
945
Helped
231
Reputation
464
Reaction score
224
Trophy points
1,323
Location
Lancashire UK.
Activity points
7,195
Can you unplug the plugs and take a photo of the other side of them too?

Then the Molex series can be identified - they do look like a very common range.

Not KK though.
 

FvM

Super Moderator
Staff member
Joined
Jan 22, 2008
Messages
48,405
Helped
14,251
Reputation
28,763
Reaction score
12,939
Trophy points
1,393
Location
Bochum, Germany
Activity points
280,118
I found this, but they are RIGHT ANGLE not like that I have.
A completely different (dual row!) connector.

What's the pin spacing? A first sight, the connectors look like JST XH series (2.5 mm grid) or compatible.
 

joshskoollive

Newbie level 4
Joined
Jul 23, 2015
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
28
A completely different (dual row!) connector.

What's the pin spacing? A first sight, the connectors look like JST XH series (2.5 mm grid) or compatible.

I think the spacing is 2.00 mm
 

SunnySkyguy

Advanced Member level 5
Joined
Sep 26, 2007
Messages
6,744
Helped
1,675
Reputation
3,348
Reaction score
1,644
Trophy points
1,413
Location
Richmond Hill, ON, Canada
Activity points
50,737
those headers are square pins. not even close.

Yours are round pins, like Swiss style.

Find out from Samsung is best bet, or from the batteries they use in that slot.
 

joshskoollive

Newbie level 4
Joined
Jul 23, 2015
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
28
The connectors I have are square for sure. There is writing on the male connector that says 13 KL
 

SunnySkyguy

Advanced Member level 5
Joined
Sep 26, 2007
Messages
6,744
Helped
1,675
Reputation
3,348
Reaction score
1,644
Trophy points
1,413
Location
Richmond Hill, ON, Canada
Activity points
50,737
The connectors I have are square for sure. There is writing on the male connector that says 13 KL
SOrry I was mixing up threads from another question today with a similar connector with round pins.

These are pretty standard.
header, board-mount, 2mm square post with shroud, 1 row, x n pins
https://www.digikey.com/product-detail/en/35362-1350/WM9829-ND/775686 like this?
Wire to Board type plugs, female, 2mm 1 row x n contacts crimp type

check every dimension to dwg.

https://www.digikey.com/product-sea...=1&stock=1&quantity=0&ptm=0&fid=0&pageSize=25
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top