Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Hi amitabh262002 - The Metal slot procedure is for Metal Stress Relief this must be made for releasing stress in every wide metal line. The wide metal line are defined in PDK that your are using.Also slot directions in metal should be parallel in current flow not perpendicular and make sure that it's in staggered style slot to maximize procedure.