Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What is the output current of 8051?

Status
Not open for further replies.
E

eugenehhk

Member level 1
Joined
Sep 6, 2006
Messages
34
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,529
8051 input output current

I would like to ask what is the output current of 8051(AT89C51) for logic "0" and logic "1"?
THX:)
 

output current of 8051

That is irelevant. It just can't be more then 10mA per pin and 26mA per port. The output current depends on conected device not on controller.
 

current in 8051

If you are asking the maximum current it can sink or source, check the datasheet, it can help you more because it is dependent on what kind of 8051 you are using. There are lots of 8051 manufacturers.
 

logic 1 for microcontroller is what current

he wrote about AT89C51, and the numbers i wrote were from datasheest...
 

what is the output current of 8051

The most is 5V.
 

what is the output current rangeof 8051

sci-3d i think eugenehhk is asking for current not voltage & by the way zememerack is correct.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top