Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

what is logical Tie off cells ?where i can use those cells

Status
Not open for further replies.
Yes.. I also want to know. I found some designs use 1'b0 or generated logic_0 (using a DFF) in the same module, but don't undersrtnad what's the difference.
 

Re: what is logical Tie off cells ?where i can use those ce

The constant 1'b0 or 1'b1 in HDL is realized with a wire connecting to VDD or GND. That is fine until you consider the ESD issue where a gate of a MOS FET is connecting directly to the power supply or ground. That's where the tie on/off gates come in. They are usually provided by the standard cell library and synthesis tool can pick them up automatically.
 

Re: what is logical Tie off cells ?where i can use those ce

try this,
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top