Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

What is a Phased Locked Loop (PLL)?

Status
Not open for further replies.
PLL

a phase-locked loop (PLL) is a closed-loop feedback control system that generates and outputs a signal in relation to the frequency and phase of an input ("reference") signal. A phase-locked loop circuit responds to both the frequency and the phase of the input signals, automatically raising or lowering the frequency of a controlled oscillator until it is matched to the reference in both frequency and phase.
 

Re: PLL

In electronics, a phase-locked loop (PLL) is a closed-loop feedback control system that generates and outputs a signal in relation to the frequency and phase of an input ("reference") signal. A phase-locked loop circuit responds to both the frequency and the phase of the input signals, automatically raising or lowering the frequency of a controlled oscillator until it is matched to the reference in both frequency and phase.

For more detail plz go through the Link:
https://en.wikipedia.org/wiki/Phase-locked_loop
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top