What can cause a large offset voltage in an opamp?

Status
Not open for further replies.
L

lucky8

Member level 1
Joined
Jan 27, 2005
Messages
37
Helped
2
Reputation
4
Reaction score
0
Trophy points
1,286
Activity points
293
offset voltage

hello,

i'm analyzing 741 Op Amp. i'm having problem at the offset voltage.
my offset voltage is quite large 16mV as compared to the datasheet, it should be max=6mV.
i already check the matching currents and they match.
what are other possibilities that contributes to my large offset value?
 

offset voltage

where did you use 741 for?
 

Re: offset voltage

1. It is possible that the 741 you are using is not from the vendor of the data sheet.

2. Try another one and see if the offset is the same or better.

3. The input bias current flowing through the resistors connected to the input will add to the offset.
 

    L

    lucky8

    Points: 2
    Helpful Answer Positive Rating
offset voltage

I think your circuit is wrong. Check again!!!
 

Re: offset voltage

Did you follow the application note for the input biasing?
 

    L

    lucky8

    Points: 2
    Helpful Answer Positive Rating
offset voltage

i'm testing the offset voltage for the 741 Op amp and i use the input bias in the datasheet.
maybe flatulent is right, that the circuit i'm using is not exactly the same as in the data sheet.
i'll check it out.
thanks guyz.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…