Sinisa said:And finally, RS232 is dying breed, most new computers don't come with them, but they are one of the easiest ways to get µcu and PC to talk to each other. So for learning experience if you have one on your PC, RS232 is good starting point.
joydeepsarkar87 said:PIC 16F887 has inbuilt I2C, so you can use this technology to connect the 2 PICs. Using UART is also a way to communicate I am just giving you options.
Its just that connections will be less complicated with I2C
Good Luck
engr.hayee said:Yes you need max232 for UART communication But you should take care that the cable not exceed it's lenght limit.In wht enviroment you are using rs232.
Follow the link for finding lenght limit
https://www.lammertbies.nl/comm/info/RS-232_specs.html
mircontrollers are also written as ""uC" OR "μC"in short form.
Sink0 said:USB is not that hard as you think if you have a uC like PIC18F2550. Serial is much easier but USB is not hard. If you go for PICs microchip got axamples ready to use with a program example for PIC and for PC side.
Cya
georgz said:@sink0 you mean this? **broken link removed**
@hardyethan you mean this? http://www.amazon.com/Advanced-PIC-Microcontroller-Projects-RTOS/dp/0750686111
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?