Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

waveport assigning in CPW

Status
Not open for further replies.

prakash kumar panda

Newbie level 1
Joined
Nov 19, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,288
waveport assigning in probe feeding

Dear all,

I am using a probe feed antenna.

Could you please let me know how to set the wave port with a cap. I tried w/o cap but error is port refinement error that port is internal to the structure .

Thanks and regards
Prakash
 
Last edited:

Azulykit

Advanced Member level 4
Joined
Feb 18, 2007
Messages
1,121
Helped
219
Reputation
436
Reaction score
112
Trophy points
1,343
Location
All over the Map.
Activity points
8,407
Re: waveport assigning in probe feeding

You do say which software.

I assume that you are using HFSS. A cap is simply a metallic object on the "back" side of a port, particularly if the port is internal to the model. It serves to define the direction of the power out of the port. without that the simulator does not have a way to determine the direction of the input. If your port is coaxial for example place a thin disk on the end of the coax. Imaging that it is a bit like the shell of a coaxial connector.
 

guoqiang792

Newbie level 1
Joined
Dec 18, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,283
if HFSS ,internal port can use only lumped ports
 

jhon marvi

Newbie level 2
Joined
Dec 4, 2012
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,294
Re: waveport assigning in probe feeding

Hi All, I got some problems on size of coaxial wave port. Since i am simulated planar antenna which i am using wave port to be touched with my feed point of antenna, although the result of simulation (...)©
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top