Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Wants to make call from my mobile using AUBTM20 blutooth module

Status
Not open for further replies.
R

rajeev196raj

Newbie level 3
Joined
Jul 14, 2012
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,297
Hi All,

I am very new to bluetooth ,i wants to make call from my mobile using the AUBTM20 Blutooth module. I connected the module to PC hyperterminal and checked the module it replies "OK" and i have the following doubts

1>When i type AT from PC hyperterminal the module repies all the commands related to the BT module but there is no commands related to make a call.

2>I can paire the AUBTM20 with my mobile but when i type AT+INQ(from PC hyperterminal) it replies the "ERROR" message

Can anybody aware of these problems please help me to solve

Thanks in advance
Ra
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top