Hi,
My recommendation: If you want a comparator, then use a comparator.
There's a good reason why they designed comparators as well as amplifiers.
There are already threads discussing this in detail.
Klaus
Every manufacturer and every distributor should have selection tables as well as interactive selection tools. They are free to use.Which ICs you reckon will be appropriate?
Hi,
Yes, it is a comparator and will do it's job as a comparator.
Are you aware that you don't give any requirement / specification?
Thus it is impossible to say if it fits your needs.
Klaus
Hi,
A comparator compares two voltages.
It doesn't care about:
* thermostat
* sensor
* RTD
* room temperature range
* roof mount
* height from ground
Thus your post is useless.
--> show your circuit, give electrical specifications for the comparator
Klaus
--> ???does not play around like LM741
--> ther is no LT7041.I have ordered LT7041
You surely have read the datasheet ... (if not, do you expect us to read it for you?)Ideally with 24vdc Power Supply, but can manage to provide 12v as well as the supply.
Wide Supply Voltage Range of 1.6 V to 6.5 V
--> yesHave you any experience with some of the older...
--> I live at almost the opposite side of the earth...how can I know what is available in your area?... available...
You were not satisfied about LM741 output voltage --> Thus this is a parameter to look for. But you didn't show a schematic, no output_current specification, no output_voltage_low specification.....how can we know what you need?There are no more limitations I can think of.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?