Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

virtual terminal and pic16f877a

Status
Not open for further replies.
J

jouyorin

Junior Member level 1
Junior Member level 1
Joined
Mar 26, 2014
Messages
17
Helped
2
Reputation
4
Reaction score
2
Trophy points
3
Visit site
Activity points
118
Hi
I have a problem in communication between pic16f877a and virtual terminal..i make a circuit of mesure alternative voltage(0_400v)..the circuit is working and i can read all values with lcd but in virtual termainal i read only values between 0 and 250v.. i didn't undrestand what's exactelly the problem!
can someone help me!!
Sans titre.png
 

This is obviously a software problem although I can't understand why you are using such low value resistors in the voltage divider to the ADC.
Assuming the LCD is accepting ASCII character data, all you need to do is write each character you send to the LCD to the USART as well.

Brian.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top