hole in a pad cadstart
Thanks to all for replies, i will try the btbass tip.
============================================
Hey crypted...
What is a version of Power PCB that you are using? If your version is 5.0 is possible to print the holes.(On version 4 i don´t know).
If you have the version 5.0, left click on pad to select , them right click on selected pad and choose Query/Modify, click on Pad Stack Button, select the 3 objects as show here **broken link removed** ; the value 25 is the size of hole that you need and you can change this value to more or less.
Note: For each different footprint that have on your design you need to select one pad of each different footprint. For example, if your design have one DIP16, one R1/4w and one DIP32 you need to select one pad of each item (holding control button) and clicking with left mouse button, on this case, using the three components above, you will need to select only three pads; but, if your design have one DIP16, ten R1/4w, one DIP32 footprints, you will need to select only 3 pads , because that design have 12 footprints, but only 3 different footprints.
When asked if you want to apply the changes for all pads, answer ALL.
If you have not understand, please contact-me for more informations.
MKW.