Crabe05
Newbie level 1
Hi everybody.
I've made 2 'memory8' module (that store 8 bits encoded data). One is read-only, the other is read-write. Here is the output with the ro memory :
All is good.
But with rw memory :
Ouch !!
What happened ?
Thanks a lot, Crabe.
I've made 2 'memory8' module (that store 8 bits encoded data). One is read-only, the other is read-write. Here is the output with the ro memory :
Code:
[00]: 10100010 (a2|162)
[3f]: 01100101 (65|101)
[6d]: 00011011 (1b| 27)
[ff]: 10000111 (87|135)
[a2]: 00000000 (00| 0)
[3f]: 01100101 (65|101)
All is good.
But with rw memory :
Code:
read
[00]: 10100010 (a2|162)
[3f]: 01100101 (65|101)
[6d]: 00011011 (1b| 27)
[ff]: 10000111 (87|135)
write
[a2]: xxxxxxxx (xx| x)
[a2]: 10011001 (99|153)
[3f]: 00001111 (0f| 15)
read
[3f]: 0xx0x1x1 (XX| X)
[a2]: 00000000 (00| 0)
[3f]: 0xx0x1x1 (XX| X)
What happened ?
Thanks a lot, Crabe.