davidgrm
Full Member level 4
Hi
I am using QuartusII and it is not happy with the Verilog code below. It gives this error: Error: Can't resolve multiple constant drivers for net "BUSY"
I would appreciate it if someone could suggest how to do this. I want to set Busy on the Negedge of Strobe and I want to clear it on the negedge of PC_DATA_SENT. Strobe is an input and PC_DATA_SENT is coming from a different module. Thanks
BUSY is an output.
code snippet:
always @(negedge PC_Data_Sent)
begin
BUSY = 0;
end
always @(negedge STROBE)
begin
BUSY = 1;
end
I am using QuartusII and it is not happy with the Verilog code below. It gives this error: Error: Can't resolve multiple constant drivers for net "BUSY"
I would appreciate it if someone could suggest how to do this. I want to set Busy on the Negedge of Strobe and I want to clear it on the negedge of PC_DATA_SENT. Strobe is an input and PC_DATA_SENT is coming from a different module. Thanks
BUSY is an output.
code snippet:
always @(negedge PC_Data_Sent)
begin
BUSY = 0;
end
always @(negedge STROBE)
begin
BUSY = 1;
end