UWB_ANTENNA in Ansoft Designer

[Mustafa_Engineer]

Dears,

I have problem to simulate the disc monopole UWB antenna in ansoft desginer.

error message: the port poorly referrenced.


please help me

 

[zirtapoz]

Dont use gap port. use just 50 ohm port.

 

[Mustafa_Engineer]

hi zirtapoz ,

Please i have changed the port setting but still have tha problem.


Please can you open my file and change it ?!


regards

 

[zirtapoz]

Ground plane was 1mm. slided for the error. So check your design.

 

[Mustafa_Engineer]

Hi zirtapoz,

Thanks a lot for your help.

I have question , why you have moved the ground plan by 1 mm ? because in reality the TL and the ground plane will be exactly on each other ?


thanks