T
treez
Guest
Hi,
For HV Buck using LNK304 as on page 6 of datasheet (2nd schem down)...
LNK304 datasheet
https://www.mouser.com/ds/2/328/lnk302_304-306-179954.pdf
...Is their any reason that we cant use a TL431 and a divider with the opto instead of just a zener?
(we don’t want the zener’s poorer tolerance)
For HV Buck using LNK304 as on page 6 of datasheet (2nd schem down)...
LNK304 datasheet
https://www.mouser.com/ds/2/328/lnk302_304-306-179954.pdf
...Is their any reason that we cant use a TL431 and a divider with the opto instead of just a zener?
(we don’t want the zener’s poorer tolerance)