Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Using seq_constant in Conformal

Status
Not open for further replies.
N

nohj_yar

Junior Member level 1
Junior Member level 1
Joined
Jan 16, 2015
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
133
Hi all!

I'm running formal equivalence on RTL to Gate-level netlist. One of the errors that i encountered is the reset DFF's of revised is connected directly to ground and in the golden the reset is connected to the GSR. However, when i used the option set flatten model -seq constant, the in-equivalence was gone.
How was this happen?
I really appreciate your help..

Thanks!
JR

- - - Updated - - -

What does -seq_constant means? I really don't understand what is written in the manual..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top