Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Using CCS CDC driver on Windows XP

Status
Not open for further replies.

tgq

Full Member level 5
Joined
Jul 15, 2002
Messages
289
Helped
7
Reputation
14
Reaction score
4
Trophy points
1,298
Activity points
2,360
Hi
I've tried CCS CDC ex_usb_serial2.c example, my board is recognized by Windows XP but it asks for CCS RS232 Demo
What must I change in order to use standard CDC class provided with Windows?
Thanks
 

tgq

Full Member level 5
Joined
Jul 15, 2002
Messages
289
Helped
7
Reputation
14
Reaction score
4
Trophy points
1,298
Activity points
2,360
ccs rs232 demo driver

I just change Vid/Pid in CCS USB header file to match Vid/Pid in Microchip CDC inf file, and it works fine
I will post my blink LED CDC example soon in this board :)
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top