Using 8051 for making a PLC

[hynix]

Hi all
can 8051 be used for making the PLC to be used for small industrial control, if yes pl helpme to know any web-link is avalable to design with hardware & software I am very much intrested to know more about it.

thanks a lot!

 

[jzaghal]

plc 8051

Hi,

Maybe this is a helpfull link:

http://www.microshadow.com/lwfolder/brochure.pdf

Good Luck.

 

[hynix]

8051 ladder

thanks for the link,
but that give any design details!

 

[direnc]

8051 based plc

There was such a project in Elekt*r 1998 October issue. The magazine itself is not enough to build it,though. They sell the software separately on a floppy, as far as remember.

 

[dipchip]

microcontroller based plc

Take a look at

**broken link removed**
http://www.mcselec.com/an_22.htm
**broken link removed**


Several years ago I thank there was another company that market firmware/software to do this thank the name started with E... don't remember, haven't seen their adds in a few years. I check and see if I have anything laying arround. found it

Exor Inc. (ladder logic compiler) use thank this use Franklin C compiler to generate code.

 

[mgajo]

plc using 8051

try this:
**broken link removed**

 

[trader]

plc compiler

LAB PLC is a PLC Compiler written in VB DOS.
The PLC software is written in BASCOM-8051 and runs in a small 20 pins 8051 chip
https://www.mcselec.com/an_26.htm

 

[harri_el_sucio]

ladder logic for 8051

Take a look at

**broken link removed**

is very interesting , but is in spanish

 

[Robin Hood]

atmel based plc

A previous version from

http://www.microshadow.com/

all included.

 

[dipchip]

ladderwork

Anyone have any work to share on adapting ladderworks to generic 8051 boards?

 

[koky]

ladder 8051

You can see these document, if someone develop the scheme please upload it

 

[jzaghal]

ladderworks plc

Hi,

I am very much interested in this topic. Any idea about
the bootloader for this design ??

Thanks. 8O 8O 8O

 

[maziar]

ladder editor 8051

i have cygnal c8051f000 how work it with ladderwork ?

 

[monty_burns_007]

ladder logic für 8051

Is there also a software which converts ladder diagram to microchips PIC source code ? :wink:

Monty 8)

 

[frigo]

ladderwork download

Hi friends,
this is an italian site with a 8052 micro PLC project but the download project files don't works.
Bye frigo

**broken link removed**

 

[msuntech]

plc 8051

Hi friends,
this is an italian site with a 8052 micro PLC project but the download project files don't works.
Bye frigo

h**p://frelectronics.bravepages.com/modulo_cpu.htm

how do ladderwork application

Added after 1 hours 53 minutes:

A previous version from

h**p://www.microshadow.com/

all included.

hi friends :

can you supply " LadderWORK " hardware circuit schematic

Very thankfulness

 

[dipchip]

ladder para 8051

I just recently found the following link to some orphaned software that has source for a ladder program:

http://www.desmet-c.com/sources.shtml

Note that the executable supplied are for Atmel ATmega 1281 / Atmel ATmega 2561, but with source it might be able to be ported to the 8051?

 

[mgajo]

ladder software for 8051 programming

"LadderWORK" has everything you need to create PLC

You define pin function as input or output.
So every schematic with 8051 can be used as PLC schematic

Download "Ladderwork" and follow examples to get clear picture
what can be done.

 

[abbas1707]

ladder compiler for microcontroller

let we by ourself make such a software which converts ladder diagrams to 8051 code...
is it possible???
who is going to help me???? who is going to co-operate wid me??

im waiting for ur response......

 

[is_razi]

8051 + ladder

Hi all
can 8051 be used for making the PLC to be used for small industrial control, if yes pl helpme to know any web-link is avalable to design with hardware & software I am very much intrested to know more about it.

thanks a lot!

i must say the microcontroller which has used in siemens s7-300 series is 8051 from philips.