Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

USB Port Over Current

Status
Not open for further replies.

arevindh

Junior Member level 1
Joined
Oct 9, 2010
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Aluva, Kerala, India
Activity points
1,406
I emergently need your help My system is showing :? on powering on **broken link removed** My battery charge is now only for 1 hour.


Two USB Ports are not working
No internal shortage of leads I think a leak in the IC .
Help meeeeeeeeeeeeeeeee :-:)-:)-:)-:)-:)-:)-:)-:)-:)-:)-:)-:)-:)-:)-:)-:)-:)-(
Don't you ? :oops::oops::oops::oops::oops::oops:
 

how did this problem start.. did it start all of a sudden or wht? try formatting ur system.
 

Probably a hardware chip has shorted or subjected to a high volatge surge due to thunder lightning or some other source. May be through the USB port, or may be through the LAN port or even may be through the power socket. Only way out is to remove the RAM's and see the performance with new RAM cards. If still the problem persists, the fault may be on the mother board.
Cheers
 

also chck the status of USB ports in the Device Manager..

probably there's sum problem with d motherboard.. get it checked wid sum hardware vendor
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top