Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

USB Data switch on and off

Status
Not open for further replies.
D

devismaster

Newbie level 1
Joined
Aug 8, 2013
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
6
I need to switch on and off the usb D+ and D- lines via the GPIO of a Raspberry Pi and I used 74HC4066. Unfortunately this IC is breaking the USB signal and it is not stable at all - constantly disconnecting or hanging. I have attached a high speed USB 2.0 device. Probably I need a suggestion for a faster analog switch or any other advice for simple solution is greatly appreciated.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top