USB connect to PIC 18F2550

[chiension]

Hi,

Can anyone help me and teach me to connect the USB connector to PIC 18f2550.

And how is the programme in mikrobasic?

i really confuse with this , please help me.

thanks you.

 

[anandpv2009]

You can use CCS for usb interface to PC.By using 'usb_cdc' driver you can create a virtual serial port for easy programming.By using VB or C# you can easily do your job.....

Connection details
Red: + 5V / Voltage + / VCC
White: D - / Data - / USB -
Green: D + / Data + / USB +
Black: GND / Voltage - / Ground

 

[chiension]

How to do the programming?

i really using same connection as you teach but i dont know how to do the programming .

Can anyone help me , show some way to me by using mikrobasic languange.

 

[mohmd10]

How to do the programming?

By any normal pic programmer by serial (as JDM programmer) using winpic800 or picpgm

Can anyone help me , show some way to me by using mikrobasic languange.

you can see the examples in
c:/program files/Mikroelektronika/mikroBasic/Examples/EasyPIC5/Extra Examples/USB HID/P18F4550/USB_HID_test

I advice you to begin with learning hid class as the example shows.

 

[anandpv2009]

Use usb_cdc than HID because you can control the hardware through PC easily than HID connection.

Programming..
In the example folder(ccs root) 2 examples are there.

Still you need more info about it post a request a in this thread.