Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Unsure how to connect scope probes to DUT with no ground points.

Status
Not open for further replies.
N

neko_whisker

Newbie level 4
Joined
Jun 2, 2011
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,338
Hi I was stumped for a moment. Please refer to the circuit diagram:- **broken link removed**
This is my first time, not knowing how to test this circuit with my oscilloscope with no ground point.
Because this circuit has no ground point. Please advise how I can perform it correctly.
The circuit is working but I wanted to learn more about the working of this circuit.
Thanks in advance.
 

And what makes you think this does not have a Ground point ? One end of capacitor C1 (not the one near fuse) is Ground :)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top